Ussc 54 Ussc
FUEL CONSIDERATIONS
Your Pellet heater is designed to burn certified Premium
Hardwood pellets that comply with Association of Pellet Fuel
Industries standards. Pellets that are so, contain excessive
amounts of loose sawdust, have been, or are wet, will result in
reduced performance. Failure to use proper fuel can aect the
longevity of the appliance. Smaller pellets could aect feed rates.
Store your pellets in a dry area and well away from the heater.
SAFETY AND COMPLIANCE
24
⅞
[632]
12
⅜
[314]
12
½
[318]
13
¾
[349]
5
½
[140]
4 [102]
21
⅜
[543]
22
⅞
[581]
22
½
[572]
Heating Specications
Height
21⅜ in. [543mm]
Width
22½ in. [572mm]
Depth
27⅛ in. [689mm]
Weight
126½ lbs. [57.5kg]
Dimensions
1
BTU output will vary depending on the quality of fuel. Use PFI listed
fuels for the best results.
2
Heating capacity will vary depending on oor plan layout of your home,
degree of insulation, and the outside temperature.
3
Pellet size may eect the actual rate of fuel feed and burn times. Fuel
feed rates may vary by as much as 20%. Use PFI listed fuel for best results.
Electrical Rating 110-120 volts, 60 HZ, 3.0 Amps
Watts (operational) 175 (approx.)
Watts (igniter running) 425 (approx.)
Electrical Specications
Minimum Cut-out / Window Opening
inches [milimeters]
14” x 22¾”
[356 x 578]
Window / Cut-Out Dimensions
" CUT HERE " CUT HERE
Ê É
Fold Here Fold Here
United States Stove Company
P.O. Box 151
South Pittsburg, TN 37380
Fold Here
PLACE
STAMP
HERE
Specications
Heat Output
1
16,400 BTU/hr.
Heating Capacity
2
500 - 1,000 sq. .
Fuel Burn Rate
3
¾ - 2½ lbs./hr.
Burn Time (lowest setting) approx. 35-40 hrs.
Hopper Capacity approx. 30 lbs.
Pellet Fuel Institute (PFI) Premium Standards
Min. Density 40 lbs. per cubic .
Size
¼” to
5
/16” diameter, length no greater than 1½”
Heat Output 8,200 BTU/lb
Moisture Content 8% by weight or less
Ash Content 1% by weight
Salt Content 300 parts per million or less
Your Pellet heater has been safety tested and listed to ASTM E 1509-04 and ULC S627-00, by Intertek Testing Services in Portland,
Oregon, USA.
Kommentare zu diesen Handbüchern